A multi-mode microplate reader measures samples using more than one detection method, but the products in this list are not all microplate readers. The PerkinElmer Victor X4 is the clearest multimode-reader match, while the optical-system product is described as an absorbance reader with single- or dual-wavelength detection. A compatible power cord may be useful for certain BMG Labtech instruments. The RFID reader and memory-card reader are not laboratory plate readers, so they are included only to clarify their intended uses.
| Product | Best fit |
|---|---|
| PerkinElmer Victor X4 | Multimode plate-reader buyers |
| Elisa Microplate Reader | Basic 48- or 96-well optical measurements |
| BMG Labtech power cord | Owners checking for a compatible replacement cord |
| 125kHz RFID reader | Contactless ID-card scanning, not plate reading |
| SABRENT media-card reader | Computer memory-card access, not plate reading |
PerkinElmer Victor X4 Multilabel Reader
Best for: Buyers looking specifically for a multimode or multilabel plate reader. The listing identifies the instrument as a PerkinElmer Victor X4, part number 2030-0040, and describes it as a multimode plate reader. That makes it the closest match to the article’s main search topic.
The bundle is described as including a power supply. Confirm the exact contents and instrument condition with the seller before ordering, because the supplied product details do not specify other accessories, supported assay modes, plate formats, or operating requirements.
Choose this if the model and part number match the requirements of your laboratory workflow. Avoid assuming that every desired measurement mode or software feature is included; those details are not provided here.
ELISA Microplate Reader, 48- or 96-Well
Best for: Buyers seeking an optical microplate reader with stated single- or dual-wavelength detection. The listing gives a wavelength range of 400–800 nm and says the instrument accommodates 48- or 96-well plates. It also describes automatic filter selection and an on-screen display for parameters.
The reader performs single-wave or dual-wave detection, according to the supplied features. A self-check runs at power-on, and the LCD is described as displaying error data if the photoelectric system has a problem.
Better for users whose work fits the stated wavelength and plate formats. The listing does not establish that this is a full multimode system with fluorescence or luminescence capabilities, so confirm detection modes before treating it as a substitute for a multimode reader.
BMG Labtech-Compatible Power Cord
Best for: Owners of a listed BMG Labtech instrument who need to check a replacement power-cord option. The product is described as a five-foot, three-prong cord with a 100–240V AC input range and a US plug. Listed compatible instrument families include NEPHELOstar, FLUOstar Optima, FLUOstar Omega, Polarstar, and FLUOstar Galaxy.
This is a power accessory, not a microplate reader. Choose it only if the connector and instrument model match your equipment. Although the listing also makes broader compatibility claims, it does not provide a complete connector specification for every device.
125kHz USB RFID Card Reader
Best for: Users who need to scan compatible contactless ID cards, not laboratory samples. The listing describes a 125kHz reader for EM4100/TK4100 cards, USB connection, and default 10-digit data output. It states that no external power supply or additional software or drivers are required, and lists support for Windows, Mac, Linux, Chrome OS, and Android 7.0 or later.
The stated reading distance is up to 8 cm, depending on the tag, and the response time is listed as under 0.2 seconds. Avoid this if you need optical plate measurements: RFID card scanning does not replace a microplate reader.
SABRENT 74-in-1 Media Card Reader
Best for: Computer users who need an internal memory-card reader/writer. The listing says it supports 74 types of memory cards and includes a USB 2.0 port. It also describes an internal power connector intended to provide sufficient power to the USB hub.
The stated operating-system support includes older Windows versions, Linux, and Mac OS X. This is computer storage equipment, not laboratory instrumentation. Choose it only for memory-card access; it has no listed plate-reading or sample-detection function.
Buying Guide: How to Choose a Microplate Reader
Do you need multimode detection?
Start by listing the measurements your assays require. A multimode reader may support different detection methods, but product descriptions can use terms such as “multilabel” or “multimode” without specifying every available mode. Verify the exact detection capabilities against your protocols before purchasing. The Victor X4 listing identifies it as a multimode reader, but the supplied details do not enumerate its modes.
Which plate format and wavelength do you need?
Match the instrument’s stated plate capacity and wavelength range to your workflow. The optical reader listed here specifies 48- and 96-well plates and 400–800 nm. Do not assume that those specifications apply to the Victor X4 or another model; check each instrument’s documentation separately.
What should you verify before ordering?
- Included items: Confirm whether the reader comes with the power supply, cables, software, and accessories your setup requires.
- Instrument identity: Check the model and part number, especially when buying a used or bundled instrument.
- Power requirements: Confirm the correct cord, connector, and electrical requirements for the specific reader.
- Workflow fit: Check plate format, detection methods, wavelength needs, and any required data-handling features.
- Product category: RFID and memory-card readers do not measure microplate samples.
Frequently Asked Questions
What is a multi-mode microplate reader?
It is a plate-reading instrument designed to measure samples using more than one detection mode. The specific modes vary by model and should be confirmed in the product documentation.
Is the ELISA reader listed here a multimode reader?
The supplied features describe single- and dual-wavelength detection. They do not confirm fluorescence, luminescence, or other modes, so verify its capabilities before buying it for a multimode workflow.
Does the 400–800 nm reader support 96-well plates?
Yes. Its listing states support for both 48-well and 96-well plates.
Can an RFID reader replace a microplate reader?
No. The RFID device reads compatible contactless ID cards; it is not described as measuring laboratory samples.
Is the BMG Labtech power cord a reader?
No. It is a power cord listed for selected BMG Labtech instruments. Confirm the connector and instrument compatibility before ordering.